Supports setting up switch gateway through the configuration tool, and
enabling ping to check network status. Log will be generated for first
successful or failed ping operation.
Logging
Records up to 1700 logs, and through the configuration tool, you can
search for logs relating to the device, time sync, ping success or failure,
red/green light signal input anomaly and anomaly recovery.
Hardware Reset
Press and hold the RESET button to reset all configurations of the device, except device ID, Board SN and MAC address.
The red light signal detector is an integrated and intelligent device that
collects evidence with greatly improved accuracy and reliability for
running red lights. Compared to RS-485 mode, this device can transmit
traffic light status over the network, not only capturing various kinds
of running red lights and providing more accurate as well as reliable
evidence, but also enabling lower deployment cost and efficient construction.
Functions
Signal Detection
Supports connecting up to 20 traffic lights and detecting their on/off
status. The signal status can be transmitted to the network camera in
real time through 100Mbps network port.
Parameter Configuration
Supports configuring 20 channels of camera parameters and channel
parameters through the configuration tool. Up to 5 camera IPs can be
bound to 1 channel.
Status Viewing
Supports viewing the online status of cameras and the red/green status
of their bound channels through the configuration tool.
Mode Switch
Supports setting red light detection mode or green light detection
mode through the configuration tool.
Anomaly Detection
Detects anomaly of 20 channels of red/green input signal and anomaly
recovery, and records logs. Signal input duration limit can be adjusted
between 1–300 seconds.
Time Synchronization
NTP time sync or sync time with PC through configuration tool.
Scene
Applicable to the detection system for pedestrians/vehicles running red lights at intersections.
Technical Specification
Basic
Status Indicator 1 RUN indicator, 1 LAN indicator, 20 input status
indicators
Function
Parameter Configuration Supports 20 channels of camera parameters and
channel parameters configuration
Status Detection Camera online/offline status and traffic light red/green
status
Mode Switch Supports red/green light detection modes
Signal Input Anomaly
Detection
Supports red/green signal anomaly detection; Signal
input duration limit can be adjusted between 1–300
seconds
Time Synchronization Supports NTP/PC time sync
Network Status
Monitoring Yes
Logging Records up to 1700 logs
Port
Signal Input 20 channels, 220V AC red/green light signal
